Ultra 35 Kit

What's included?
A HID50 35 watt kit consists of two high performance 35 watt waterproof ballasts and two 35 watt Ceramic Core UV shielded burners.





Our Ultra Thin HID Kits need no brackets, but do come with screws, cable ties and an installation guide. This is all that is required to mount the kit, tho custom brackets are available (see details on installation page).

The kits are all pre tested before leaving the factory.

35w Slim Ballast Specification:
High efficiency 89%, surface temperature 57C after 2hours using.
Input voltage: 9V~16V
Input current : 3.5A
Output Power: 35W
Operation Temperature:-40~105ºC
T CASE: - 40 ~ 120ºC
Life: More Than 2500hrs
Yellow sticker on the backside
Warranty: 12 months
CE Certification

HID X3 Fast Bright slim 35w ballast Certification:
CE, RoSH, ISO-9001-2000
Waterproof, Shockproof and Vibration Resistant.

Work Temperature -40ºC ±105ºC
Output wattage 35W ± 1W
Input Voltage 9-16V
Normal Voltage 12.0V
Max input current 5.6 ± 0.3A
Normal Current 4.50 ± 0.1A

NOTE: We have tried and tested kits and components from a number of factories and suppliers and while there is little to no difference in terms of light output, there is a enormous difference in terms of the quality of components that goes into the kits and the subsequent reliability of those kits. We have chosen not to save a few quid here and there by using cheaper kits and have gone for the best components at every choice. We also insist our suppliers test each and every kit for 24 hours before packaging. The result is we trade on our name, with the most durable and reliable kits on the market.

For example: Our UltraThin ballasts are not just water resistant, our UltraThin ballasts work under water. Ask other HID suppliers what happens with their ballasts if you try and run them while the ballast is immersed in a jar of water.

The current ballasts and bulbs have been installed tested and used on a wide variety of dirt, road and adventure motorcycles (and even the occasional car) across Europe, North America, South Africa and Australia for several years. They withstand rain, dirt, mud, dust and vibrations that go with all of those environments. We stand by our products and will replace any defective parts within a year of purchase.

Ballasts
Ultra-35: Ultra-Thin 35 watt ballasts. These are a tiny 70 x 60mm (2.8 x 2.4 inches) and are also a very compact 13 mm thick. These are the only 35 watt ballasts we do, and the only reason we broke the mould of selling only 50 watt ballasts is that these are the best quality 35 watt ballasts I have used bar none. They have been tested operating fully underwater, and have a particularly strong casing. HID50?s original aim was to sell only 50 watt HID kits, but these ballasts made us rethink the strategy. If we are going to do 35 watt HID's, then we are going to do the best quality, best design, most compact funky 35 watt HID's in the market.

All HID50 ballasts are waterproof and dust-proof. Additionally, they feature:

(a) Overload protection. The ballasts cut out at 18 volts to prevent electrical damage.

(b) Low Voltage Protection. The ballasts shut down at 8 volts or under to prevent drawing excessive current from the battery.



Options